Publicidad
Install the Fixture
1A
FINIAL WASHER
THREADED NIPPLE
SMALL WASHER
1
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
2
3
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Secure the fixture to the post with post screws.
4
5
Align the frame to fixture and secure them together using the small washers and thumb nuts.
Place the top cover and finial washer over the threaded nipple and secure them in place using the finial.
6
FINIAL
TOP COVER
THUMB NUT
FIXTURE
4
BLACK WIRE
HOT WIRE
POST
6
FRAME
5
POST SCREW
WHITE WIRE
NEUTRAL WIRE
2
Publicidad
