EDM Product 08724 Manual De Instrucciones página 16

DANGER OF ACCIDENT!.
ES Parts which were not reviewed and approved by the manufacturer can damage the machine and can lead to serious injuries.
· Only use original parts as replacement parts, especially with safety mechanisms and cutting tools.
You must change out both carbon brushes at the same time with the help of technician.
PT
TIPS FOR WORKING WITH YOUR DRILL
PROBLEM
EN
FR
Motor does not run.
Vibrations are too strong.
Instruction manual
POSSIBLE CAUSE
No electricity comes
to the machine.
The motor is overloaded
or overheated.
The carbon brushes
are used.
Screws or parts of the
machine are loose.
The grinder is not
correctly mounted.
Workpiece is not
properly supported.
08724
REF.
SOLUTIONS
Check the power supplier
and the power line.
Allow the machine to run idle for
about 2 minutes so that it can cool down.
Change out both carbon brushes
(Changing out carbon brushes).
Tighten all screws.
Mount the grinder correctly
(Installing the tool).
Secure the workpiece
(i. e. on a workbench).