Sonoff RF Bridge Manual Del Usuario página 7

Ocultar thumbs Ver también para RF Bridge:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
SONOFF TECHNOLOGIES CO., LTD.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try "Compatible Pairing Mode "
to pair.
Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of
1
two short flashes and one long flash and release. Long press Pairing button for 5s
again until the Wi-Fi LED indicator flashes quickly. Then, the device enters
Compatible Pairing Mode.
Tap "+" and select "Compatible Pairing Mode " on APP.
2
Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then
go back to eWeLink APP and tap "Next". Be patient until pairing completes.
Add sub-devices
RF Bridge
Added:0
No remote.Please add.
Tap "+" and select the remote controller type, then a "Beep" indicates that the device
enters quick pairing mode. Proceed to operate on the sub-device to pair and
"Beep Beep" indicates that the pairing is successful.
Please refer to the user manual of the sub-device for pairing method.
The device can add up to 16 sub-devices.
Specifications
Model
Input
RF
Wi-Fi
Operating systems
Working temperature
Material
Dimension
Add
RF Bridge/RF BridgeR2
5V
1A
433.92MHz
IEEE 802.11 b/g/n 2.4GHz
Android & iOS
-10℃~40℃
RF Bridge: ABS V0/RF BridgeR2: PC V0
62x62x20mm
Add Remote
Save
1-button
2-button
3-button
4-button
Curtain
Alarm
6
English
Learn Remote
60S left to press the remote button
or trigger the sensor
Exit

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rf bridge r2

Tabla de contenido