Fm Radio Operation - Tokai TSB-507K Manual De Instrucciones

TUNING THE FM RADIO
1. Power on the unit. Switch to FM radio mode by pressing the SOURCE button on the main unit or the
MODE button on the remote repeatedly, if necessary. "RADIO" will be sounded.
2. Press the TUNE /
buttons on the remote for a little while and then release to auto search radio station forward or backward
respectively (When an available station is found, the unit will broadcast it immediately and the searching
will stop). To auto search radio station forward, you can also press and hold the
sound bar or press and hold the PAIR/
press the TUNE /
3. In radio mode, it is possible to access the frequency via numeric buttons on the remote control. For
example, press buttons 8, 9 and 8 to get to 89.8 MHz.
Note: If the frequency shown on the LED display ends with a dot, this dot indicates 0.05 MHz, e.g. "89.8."
indicates 89.85 MHz.
STORING YOUR FAVORITE RADIO STATION
1. During playback, press the MEM button on the remote for storing the current station, a memory cell
number will flash on the screen.
2. Use the CH+ or CH- buttons on the remote to select the corresponding memory cell among P01-P20 for
storing the station.
3. Confirm your selection by pressing the MEM button on the remote.
4. During radio playback, press the CH+ or CH- buttons on the remote repeatedly to recall the stored
stations.
Note: In radio mode, press the
All manuals and user guides at all-guides.com

FM RADIO OPERATION

buttons on the remote to fine tune radio station. Press and hold the TUNE
button on the remote and then release. During auto searching,
buttons on the remote to stop the searching.
BT button on the sound bar will function as the button CH+.
21
/
/BT button on the