tibelec EM5893 Manual De Uso página 13

1. Connect the black probe to terminal COM and the red probe to terminal V
2. Set the function switch to the desired AC voltage rating
3. Connect the test plungers to the circuit and read the value displayed on screen
once it has stabilised.
1. Connect the black probe to terminal COM and the red probe to terminal V
2. Set the function switch to the desired DC voltage rating
3. Connect the test plungers to the circuit and read the value displayed on screen
once it has stabilised. When measuring DC voltage, the display shows the polarity
of the red probe.
1. Connect the black probe to terminal COM and the red probe to terminal
mAΩ for a maximum measurement of 200mA or at the A terminal for a maximum
measurement of 10A
2. Set the function switch to the desired AC current rating
3. Connect the test plungers to the circuit and read the value displayed on screen
once it has stabilised.
1. Connect the black probe to terminal COM and the red probe to terminal
mAΩ for a maximum measurement of 200mA or at the A terminal for a maximum
measurement of 10A
2. Set the function switch to the desired DC current rating
3. Connect the test plungers to the circuit and read the value displayed on the screen
once it has stabilised. When measuring DC current, the display shows the polarity of
the red probe.
1. Connect the black probe to terminal COM and the red probe to terminal
mAΩ
2. Set the function switch to the desired resistance rating
3. Connect the test plungers to the circuit and read the value displayed on
screen once it has stabilised.
13