Spector&Co T231 Celeste Manual Del Usuario página 4

To charge the T231 Celeste
1. Use the included USB Charging cable, plug one end into the Micro USB jack of the unit, plug the other
end into a USB powered port of any other USB AC adapter (not in included).
2. The battery full charges in 1.5-2 hours.
3. The red LED light indicates that the unit is charging, the red LED turns green when the battery is fully
charged. You can disconnect the charging cable when charging is complete.
OPERATION
1. AUX in mode
Slide the power switch of speaker to the right side, use line in cable to plug into AUX in jack will automatically
go to AUX play mode.
2. Bluetooth mode
If you are using the T231 Celeste with a Bluetooth audio device, make sure the distance between the two
devices never exceeds 10meters. Different environments may affect different reception distance.
1. Slide the power switch of speaker to the right side. The T231 Celeste will make a sound to indicate that
Bluetooth mode is activated
2. Turn on the Bluetooth on you audio device (Smartphones, tablets, etc.)
3. Searching "Spector T231" and pair, unit will automatically pair with audio device.
All manuals and user guides at all-guides.com
- 4 -