Installation Instructions; Parts Included - GE JP328 El Manual Del Propietario

Installation
Instructions
"If you have questions, call 800.GE.CARES or visit our website at: GEAppliances.com"
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT
•
for local inspector's use.
IMPORTANT
•
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Product failure due to improper installation is
not covered under the Warranty.
WARNING
•
properly grounded.
ATTENTION INSTALLER
•
COOKTOPS MUST BE HARD WIRED (DIRECT
WIRED) INTO AN APPROVED JUNCTION BOX. A
"PLUG AND RECEPTACLE" IS NOT PERMITTED
ON THESE PRODUCTS.
• Skill level - Installation of this appliance
requires a qualified installer or electrician.
• Proper installation is the responsibility
of the installer and product failure due to
improper installation is NOT covered under
warranty.

PARTS INCLUDED

4 Screws
(WB1X1137)
49-80759
All manuals and user guides at all-guides.com
Electric Cooktop
JP328
Save these instructions
Observe all governing
This appliance must be
ALL
MATERIALS YOU WILL NEED
Junction Box
TOOLS YOU WILL NEED
Pencil
Phillips and Flat Head
Screwdriver
Ruler or Straightedge
Safety Glasses
FOR TILE COUNTERTOP INSTALLATION
• Electric drill and 5/32" drill bit
• 4 / " x 1 / " masonry screws
3 1
16 4
This cooktop cannot be installed in countertops
that cannot accept screws, such as granite or
marble.
Wire Nuts
Saber Saw
1/8" Drill Bit & Electric or
Hand Drill
9