Victorinox ETA G10.212 Guia Del Usuario página 3

SETTING THE TIME AND DATE
H
I
D
E
Fig. 1
RESETTING THE COUNTERS TO ZERO (FIG. 2)
H
I
Fig. 2
C G A
1 2 3
G A
1 2 3
SETTING THE TIME AND DATE (fig. 1)
PUSHERS:
A. Chronograph start / stop
B. Split timing, zero reset
TIMEPIECE INDICATIONS:
C. Hours
D. Minutes
E. Seconds
F. Date
The crown has 3 positions:
1. Normal position.
2. Date setting.
3. Time setting (hours and minutes),
stop seconds.
B
SETTING THE TIME:
F
1. Pull the crown out to position 3. The
seconds hand will stop. Remember
the date advances at 12:00 midnight,
not 12:00 noon.
2. Turn the crown until the hands
indicate the desired time.
3. Push the crown back in to position 1.
RESETTING THE COUNTERS TO ZERO (fig. 2)
CALIBRE TYPE If the chronograph hands spin when you pull out the crown to
position 2, you have an ETA calibre G10.212. If the chronograph hands do not
spin, you have a calibre G10.211.
RESETTING THE COUNTERS TO ZERO ON THE
1. Pull the crown out to position 2.
2. Press pusher A to select the desired counter:
30-minute counter
60-second counter
or 1/10 -of-a-second counter (G).
th
3. Press pusher B to reset the counter hand to zero.
RESETTING THE COUNTERS TO ZERO ON THE
30-minute counter
1. Pull the crown out to position 3.
B
2. Press pusher A to reset the 30-minute hand to zero.
60-second counter
1. Pull the crown out to position 2.
2. Press pusher B to reset the 60-second hand to zero.
1/10 -of-a-second counter
th
1. Pull the crown out to position 2.
2. Press pusher A to reset the 1/10
CHRONOGRAPH INDICATIONS:
G. 1/10 -of-a-second counter
th
H. 60-second counter
I. 30-minute counter
SETTING THE DATE:
1. Pull the crown out to position 2.
2. Turn the crown counter clockwise
until the desired date is displayed.
3. Push the crown back in to position 1.
CALIBRE G10.212
(I)
(H)
CALIBRE G10.211
(I)
(H)
(G)
-of-a-second hand to zero.
th