Troubleshooting - Seamax SUP20S PRO Manual Del Usuario

Seamax Portable12V Electric Air Pump for Inflatable SUP and Paddle Board
FAULT
The air pump cannot 1. The power source is
be started normally. not plugged properly.
2. The fuse in DC plug (7)
is burnt out.
3. Overheating or
overload.
Slow or abnormal 1. Check whether the
inflation. hose is blocked or
cracked.
2. The joint between the
hose and air pump or
inflatable product is not
installed properly.
3. Make sure the power
source meets the pump's
requirements 12V 15A
QUALIFIED POWER SOURCE

TROUBLESHOOTING

INSPECTION
1. Make sure the power wire is plugged in the 12V DC
socket.
2. Change the fuse.
3. Cool the motor and restart it.
4. If the problem cannot be solved, please contact the
original seller or authorized personnel.
1. Change the hose or make it unblocked, and check whether
the hose is cracked.
2. Reinstall the hose.
3. If the problem cannot be solved, please contact with the
manufacturer or its service agent or the similar authorized
personnel.
4. Do NOT use compact AC to DC wall convertors to power
the pump. Connect the pump car charger adapter directly to
a car's charger socket. Or use a well charged minimum 12V
7AH external lead acid battery with the optional 12V battery
connector.
Page 8
www.seamaxmarine.com 1-877-907-7766
SOLUTION
NON-QUALIFIED POWER SOURCE