Installation - Home Decorators Collection HB7086-260 Manual De Instrucciones

Installation

1
Mounting the hardware

Thread the nipple (FF) into the central
holes on the mounting bracket (GG).

Thread the hex nut (BB) onto the nipple
(FF). Do not tighten the hex nuts (BB) at
this time.

Pull the supply wires out from the outlet
box and mount the mounting bracket (GG)
to the outlet box using the bracket
mounting screws (EE).

Place the fixture pan (A) over the outlet
box and onto the nipple (FF).

Adjust the nipple (FF) until it protrude out
from the fixture pan (A) 1/4 in.

Remove the fixture pan (A) and secure the
position of the nipple (FF) by tightening the
hex nut (BB) against the mounting bracket
(GG).
2
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.

Connect the black supply wire to the black
fixture wire using a wire nut (DD).

Connect the white supply wire to the white
fixture wire using a wire nut (DD).

Connect the fixture ground wire to the
supply ground wire using a wire nut (DD).

Wrap all wire connections with electrical
tape for a more secure connection.

Carefully tuck the wires and wire nuts (DD)
into the outlet box.
All manuals and user guides at all-guides.com
EE
A
5
Please contact 1-800-986-3460 for further assistance.
GG
FF
BB
GG
www.homedepot.com/homedecorators
DD