Kohler K-1164 Manual De Instalación página 2

21"
(53.3 cm)
3-1/8"
(7.9 cm)
10-13/16" (27.5 cm)
3-1/2"
(8.9 cm)
Product Information
Drop-in rim style
Fixture*: basin area
Bathing well 55-1/4" (140.3
cm) x 23-1/2"
(59.7 cm)
water depth
To overflow 15" (38.1 cm)
* Approximate measurements for comparison only.
Pump: HP
1-speed 1-1/4
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
Included Components:
Cutout template
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump and heater.
1042017-1-A
4-3/4" (12.1 cm)
72" (182.9 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1164 shown
top area weight
64-1/2" (163.8 112 lbs.
cm) x 32" (81.3 (50.9
cm) kg)
capacity
75 gal. (284.1 L)
V Hz A
120 60 7.5
required
1042557-7
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
Pump/Control
Access
42" (106.7 cm)
19-1/2"
(49.5 cm)
21"
(53.3 cm)
1-1/2" OD
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 80
lbs./square foot (390 kg/square meter) loading.
The suction line extends 4-3/4" (12.1 cm) beyond the edge of the
rim. The pump base extends 1/8" (3 mm) beyond the edge of the
rim. Modify the framing as needed.
This fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
2
1-1/2"
(3.8 cm)
Drop-In Rim Detail
Kohler Co.