Hydraulic Installation; Electrical Installation - Uponor Combi Port Guía Rápida

1.4 Hydraulic installation

Warning!
Leaking connections can cause personal injury and
property damages.
Note
Install the pipes in accordance with planning
documentation.
Connect the primary supply lines with the corresponding ¾" ball
valves at the HIU.

1.5 Electrical installation

EN
Warning!
Required electrical connections and installations,
commissioning and maintenance must only be performed
by an authorised person in accordance with local
standards and regulations.
Warning!
Establish equipotential bonding by using a copper
equipotential bonding conductor (cross-section at least
6 mm²). Connect the earthling clamp to a suitable
equipotential bonding rail in the building.
1.6 Filling and flushing
Fill and flush the system according to local regulations and
standards.
1.7 Tightness testing
Warning!
Leaking connections can cause personal injury and
property damages.
Caution!
Pressure leaks may occur even at normal operating
pressure, and must be fixed immediately.
1.8 Commissioning and hand over
Caution!
Improper commissioning can lead to property damage.
Complete commissioning by following these steps:
4 | Combi Port / Aqua Port INS
Minimum 2 hours
According to local standards and
regulations
| Quick guide
1. Check the settings.
2. Complete the acceptance/commissioning protocol.
3. Hand over the documentation and protocol to the homeowner.