Toona 4 Serie Instrucciones De Instalación página 20

Declaration in accordance with the following Directives: 2004/108/EC (EMC); 2006/42/EC (MD) annex II, part B
Note - The content of this declaration corresponds to that specified in the official document deposited at the Nice S.p.A. headquarters
and, in particular, to the latest revised edition available prior to the publishing of this manual. The text herein has been re-edited for editorial
purposes. A copy of the original declaration can be requested from Nice S.p.A. (TV) I.
Number: 288/TO
Manufacturer's Name:
Address:
Person authorized to compile
the technical documentation:
Type of product:
Model:
Accessories:
The undersigned Mauro Sordini as Chief Executive Officer, hereby declares under his own responsibility that the product identified above
complies with the provisions of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 15 December 2004 on the approximation of the laws
of Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, in accordance with the following harmo-
nised standards: EN 61000-6-2:2005, EN 61000-6-3:2007 + A1:2011
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly-completed machinery:
Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machines and amending directive
95/16/EC (consolidated text)
• It is hereby declared that the pertinent technical documentation has been drafted in accordance with Annex VII B of Directive 2006/42/EC and that the
following essential requirements have been met: 1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
• The manufacturer agrees to send the national authorities any pertinent information on partly-completed machinery, in response to a motivated request,
without affecting its intellectual property rights.
• If the partly-completed machinery is operated in a European country with an official language other than the language used in this declaration, the importer
must include a translation with this declaration.
• The partly-completed machinery must not be operated until the final machine in which it is to be incorporated is declared to conform to the provisions of
Directive 2006/42/EC, if applicable.
The product also complies with the following standards:
EN 60335-1:2012, EN 60335-2-103:2003 + A11:2009
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003 + A1:2011, EN 12445:2002, EN 12453:2002, EN 12978:2003 + A1:2009
Oderzo, 30 October 2014
6 – English
DCE declaration of conformity
and declaration of incorporation of partly-completed machinery
Revision: 5
Nice s.p.a.
Via Pezza Alta 13, 31046 Rustignè di Oderzo (TV) Italy
Nice s.p.a.
Electromechanical gear motor in the "TOONA" series
TO4005, TO4006, TO4015, TO4024, TO4605, TO5015,
TO5016, TO5024, TO5605, TO5624, TO7024
Language: EN
(Chief Executive Officer)
Mr. Mauro Sordini