Konig Computer CMP-REPEATVGA1 Manual De Uso página 3

All manuals and user guides at all-guides.com
Receiver
6) VGA Monitor connection
7) RJ45 Input connection
8) DC5V connection
9) Power LED
10) Adjusting Switch
With this switch it is
possible to control
the signal resolution
distance (Short ,
Medium , Long). This
means the signal will
always be perfect in
spite of the length of
UTP cable is used.
Connections en Operation:
Before installation, please make sure all devices you wish to connect have been turned
off.
• Connect the input sources into the Transmitter (Input cables are optional)
• Connect a Monitor into the Output of the Transmitter (local view)
• Connect the Monitor into the Output of the Receiver. (distance view)
• Connect the Network cable between the Transmitter and Receiver.
• Insert the DC side of 5V power supply into the Transmitter and Receiver and then connect
the AC side of the power supplies into the wall outlets
VGA cable
Trans-
mitter
PC
VGA cable
Monitor
Receiver
UTP/FTP cable
up to 150m
3
Monitor
VGA cable