Kohler K-1248-CG Manual De Instalación página 2

Roughing-In
32-9/16" (82.7cm)
25-3/4"
(65.4cm)
17-1/16"
20-1/4"
(43.3cm)
(51.4cm)
8-5/16"
(21.1cm)
35-1/4" (89.5cm)
SYMMETRICAL ABOUT C's
CUT-OUT DETAIL
42" (106.7cm)
1-3/16" (3cm)
Product Information
Drop in rim style, custom pump
Drop in rim style, custom pump
Fixture*: basin area
Bathing well 50" (127cm) x 31"
(78.7cm)
water depth
To overflow 14 1/2" (36.8cm)
* Approximate measurements for comparison only.
Pump:
1 speed
Included Components:
Cut out template
Required Electrical Service
Dedicated circuit required, protected with Class A Ground Fault
Circuit Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61cm) of the
pump.
A
1014769-1-
K-1248-*
K-1263-CG
PUMP/CONTROL
ACCESS
17-3/4"
14-5/8"
(45.1cm)
(37.1cm)
11"
(27.9cm)
L
3-1/2" (8.9cm)
2-7/8" (7.3cm)
3" (7.6cm)
K 1248 CG shown
K 1248 CN shown (top
view only)
top area weight
61" (154.9cm) x 112 lbs.
34" (86.4cm) (50.8kg)
capacity
86 gal. (325.5L)
HP V Hz A
1 1/4 120 60 7.5
113927 7
120V, 15A, 60 Hz
No change in measurements if connected with drain illustrated.
(K 7161 AF or K 7161M AF)
Minimum access panel
Pump/control
Faucet area
7-1/2" (19.1cm) MAX.
4"
36" (91.4 cm)
(10.2cm)
36-5/8" (93cm)
72" (182.9cm)
1-1/2" O.D.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 80
lbs./square foot (390 Kg./square meter) loading.
If installing a rim mount faucet, make sure there is no interference with
drain overflow and circulating system before drilling any holes.
Consult local and national codes for minimum air gap requirements if
installing a spout on the faucet deck.
Pump must be relocated to custom position at the time of installation.
Provide adequate clearance.
Fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
2
20" (50.8cm) W x required
15" (38.1cm) H
recommended
1-1/2"
(3.8cm)
DROP-IN RIM
DETAIL
10" (25.4cm)
MAX.
K-1263-CN
PUMP/CONTROL
ACCESS
19-1/2" 21"
(49.5cm) (53.3cm)
Kohler Co.