BeeWi BBX200 Manual Del Usuario página 11

powered on. If no paired device is found, connecting mode will time out
and the Transceiver will switch to pairing mode automatically to search for
new devices. Alternatively, you can press and hold mFB at power on to
force it to pairing mode.
- For Dual Air™ streaming, repeat the above pairing sequence with a
second device. After the second device has been paired and connected,
the Dual Air function will start automatically and the music will be streamed
to both devices.
Note: The Transceiver supports pass code "0000", "1234" and "8888"
for a wide compatibility. Pairing will not work with playback devices
generating a random pass code.
Note: Only the last two paired devices will be stored for Dual Air™
streaming.
3.3. Connection & use
The Transmitter will automatically connect to the last 2 connected devices
when it is powered on. If you wish to manually connect a device, just press
the Transceiver mFB. make sure the headphones you wish to connect to
are turned on prior to request the connection from the transceiver and they
are not already connected to another device.
You can adjust the volume directly from the Transceiver using the volume
keys and enable or disable the KSS sound limiter by pressing the
more than 4 seconds.
3.4. Function matrix
Feature
Power On
Power Off
Volume Up / Down
KSS Sound Limiter
Connecting
Connecting Dual Air™
Tx Searching
All manuals and user guides at all-guides.com
Key Conditions
Power Off
Power On
music Streaming
Power On
Power On
Idle / streaming
Connection time out / No
device found
for
Operation
Long Press 2 seconds
Long Press 2 seconds
Short Click
Long press 4 seconds
Automatically
Short click
Automatically
ENGLISH
11