Ferlabel CONS2 Manual Del Usuario página 5

CONS2/CONS3 - User manual
(A) +: Call key
(B) -: Decrease key
(C) 0: Reset key
(D) Telephone sockets for connection to display
ATTENTION: Read this manual before using the product.
ADVANC E: Press button + (A) to increase the number;
DECREASE: Press button - (B) to visualize the previous
number;
RESET: Press button 0 (C) to reset the display.
Countertop console (CONS2/CONS3) connected to
display:
Connect the display on SL mode (slave) to the console
by telephone wire and plug (6 position) using one of the
telephone sockets of the display;
Note: Maximum connection 2 console for each display.
All manuals and user guides at all-guides.com
(>20 cm), 220V cables (>20cm), power cables (>20cm)
etc... When making connections over distances of more
than 5m, use screened, twisted cable with earth brai-
ding.
e n g l i s h
ATTENTION: Do not run cables close to neon