LevelOne NVR-0104 Guía De Instalación Rápida página 7

All manuals and user guides at all-guides.com
NVR-0104 Quick Installation Guide 7
Access the NVR with its default IP address
The NVR comes with a pre-configured static IP "192.168.101.50". However, it is
only used when there is no DHCP server presented in the network. The NVR will
turn on its DHCP server function and act as the DHCP server in the network.
To connect to the NVR, connect the PC directly to the NVR using a crossover
CAT5 Ethernet cable. Simply access the NVR from your web browser with its IP
address.
Again, you should be prompted for the username and password. Enter its default
username "root" and password "root" and then click "OK" to enter the system.