Tabla de contenido
Publicidad
Computer
CONTROL PANEL FUNCTION
CALORIES: indicates estimated calories burned
PULSE: estimated heart rate
INCLINE: indicates incline in precntage of grade in 1% increment
DISTANCE: indicates km travelled in 0.1 km increment
TIME: indicates time you workout, can be set to countdown
MODE: Enter programme selection, enter time setting
A. General Operation
1/. Turn on the Power Switch at the front of your
treadmill. This is located next to the Mains Power
Cord inlet.
2/. Place the Safety Key into the magnetic recess in
the middle front of the Computer Console. The
console will give an audible signal and all console
window displays will function with a start display
value of 0 except the Speed window which will display
a flashing P1.
* Note: - If the Safety Key is not placed correctly or is
faulty, the windows will display "-----------". This
means that the treadmill will not operate.
** If the Safety Key falls off during exercise, the
console will give an audible signal and all console
window displays will reset to display value 0 and the
treadmill will stop.
*** To stop the treadmill in an emergency, simply
pull the safety key off its mount in the console front,
or simply press the STOP button on the bottom right
of the console. It is important that you connect the
clothing clip to your shirt or other suitable clothing
during exercise to ensure that this safety system can
operate easily.
All manuals and user guides at all-guides.com
Monitor Instruction
(GBR)
START/STOP: start/stop the treadmill
SPEED: indicates kph in 0.1 kph increments
FAST/SLOW: Used to adjust speed in 0.1 kph increments
To set programs(P1~P10), ,Set time to countdown
UP/DOWN: Adjust incline
ONE-TOUCH SPEED 4,6,8,10:Used to reach ideal speed
ONE-TOUCH INCLINE 0,5,10,15:Used to reach incline
SPEED PROGRAMME
Page 17
Publicidad
Tabla de contenido
