Hoover Synua Plus Manual De Instrucciones página 4

PREPARING YOUR CLEANER
1. Remove the accessories from the main packaging. You should find the following:
• Cleaner body
• Cleaner handle
• 3 in1 tool
• Extension tube
• Long crevice tool
• Carpet and floor nozzle
• Parquet caresse nozzle*
• Electric power nozzle*
• Mini-turbo nozzle*
• Multi-function tool*
2. Assemble the cleaner handle (Fig. 2a) and fix in position with the supplied screw. (Fig. 2b)
3. Secure the 3 in 1 tool to the rear of the cleaner handle. (Fig. 2c)
4. Secure the nozzle to the product. (Fig. 2d)
For models equipped with electric power nozzle:*
The electric power nozzle has to be secured to the product neck as per the carpet and floor nozzle,
but the electrical connection must be inserted to Electric power nozzle socket. (Fig. 3)
For models equipped with mini-turbo nozzle:*
1. The mini-turbo nozzle can be connected directly to the flexi tube handle. (Fig. 4a)
2. If any blockages are encountered, please open the inspection cover. (Fig. 4b)
3. Ideal to clean soft furnishings and for the pet hairs removal.
For models equipped with multi- function tool:
• The Multi- function tool can be inserted directly onto the flexible house.
Cord storage:
To store the cord after cleaning:
Wrap the cord around the two cord hooks. (Fig. 5)
notE: During cleaning, the cord can be clipped in the cord grip on the rear of the handle to
avoid any interference while cleaning.
* Certain models only
All manuals and user guides at all-guides.com
power switch:
To switch the cleaner on, and off press the power button in the centre of the cleaner. (Fig. 6)
Cleaner lock release:
To start cleaning, unlock the cleaner by pressing with your foot the locking pedal on the nozzle.
(Fig. 7a)
For models equipped with electric power nozzle:*
To start cleaning, unlock the cleaner by placing your foot on the nozzle and lower the main
body of the cleaner. (Fig. 7b)
To switch on the agitator: Press the agitator On/Off pedal. (Fig. 7c) The blue indicator light on
the pedal will come on.
The agitator will stop when the cleaner is in the parked position.
Using the flexi tube:
Remove the flexi tube from the handle location in the cleaner. (Fig. 8)
You are immediately ready to use it alone or combined with the accessories, as desired:
The flexi tube gives you the maximum flexibility of usage. (Fig. 9)
important - When using cleaning tools, the cleaner must be kept in the upright position, and
held.
Using your 3 in1 tool:
the 3 in1 tool (Fig. 10) is composed of:
The 3 in1 tool can be used directly on the flexi tube or combined with the additional exten
sion tube.
assembly the dust bin:
2
USING YOUR CLEANER
• 3 in1 tool (stored on board)
• Extension tube*
• Mini-turbo nozzle*
• Long crevice tool
• Multi-function tool*
• Crevice tool to clean corners and hard to reach areas
• Furniture nozzle to clean curtains and soft furnishings
• Dusting brush attachment (with bristles) to clean delicate surfaces
• Dust bin to be put in the location
• To rotate the dust bin and lock into main body
GB