Cleaning And Maintenance - Elite Cuisine ESB-300X Manual De Instrucciones

HOW TO USE YOUR BURNER
1. Before plugging in your new burner, check to see that the electric circuit is not
overloaded with other appliances. This unit should always be operated on a
separate 120Volt AC outlet.
2. Be certain that your unit is set on a leveled, flat, heat resistant surface. Also, avoid
using pans that are unstable and easily tipped.
3. Place pan on heating element.
4. Turn the temperature control knob to the desired heat setting for LO (low), medium
(MED) or high (HI).
CAUTION: NEVER touch the heating elements while the burner is in operation. Doing
so will lead to serious personal injury.
5. When cooking is complete, turn the temperature control knob back to the "OFF"
position.
6. If the burner is not to be in use for a long period of time, it is highly recommended
to unplug the unit from the outlet. This prevents any accidental burns or injury.
7. When all parts have thoroughly cooled, be sure to clean the burner. Dry all parts
thoroughly before storing or operating the burner.

CLEANING AND MAINTENANCE

NOTE: MAKE SURE THE APPLIANCE IS SHUT OFF, UNPLUGGED FROM THE ELECTRICAL
OUTLET AND COMPLETELY COOL BEFORE CLEANING.
1. Wipe off the base and heating element with a damp soapy cloth.
CAUTION: NEVER IMMERSE THE BASE OR ELECTRICAL CORD IN WATER OR ANY
2.
OTHER LIQUID!
3. Thoroughly dry all parts before storing or using the unit again.
4. DO NOT USE ANY ABRASIVE SOAPS, DETERGENTS, OR CLEANING MATERIALS TO
CLEAN THE BURNER.
5. Any other servicing not recommended by the manufacturer may cause hazards and
should be performed by an authorized representative.
Questions? We're here to help! Visit: www.maxi-matic.com for support on this product. 4