Creative Technology Zen Vision W Manual Del Usuario página 13

Zen Vision W (Monet WA) CLE_QS.book Page 11 Wednesday, September 27, 2006 10:06 AM
Connecting Your Player to a TV
To view your player's content on a larger screen, connect your player to a TV
using the supplied audio video cable
WARNING
DO NOT use a standard audio video cable.
1 Slide the Power switch on your player towards the Power
hold it there until the display lights up.
2 If you are not in the main menu, press and hold the Menu/Back
3 Select System Settings Photo/Video Settings
4 Select Auto (NTSC) or Auto (PAL). Refer to the User's Guide for your TV if
you are not sure about your TV's display format.
5 Connect your player to a TV with the supplied audio video cable.
1 2 3 4 1 A/V Out jack
2 Video In jack - Yellow
3 Audio In (Left) jack - White
5
4 Audio In (Right) jack - Red
5 Red connector
7 6 6 White connector
7 Yellow connector
8 Audio Video cable
8
Connecting Your Player to a TV 11
icon and
button.
Video Out.