Publicidad
ENGLISH
pushing button (3)
reset button (1)
dials (2)
The default combination is 0-0-0. To set your own combination, please
follow these steps:
1. With the lock in the 0-0-0 position.
2. Press down the reset button (1) with a tool, such as ballpoint pen, until
you hear a 'click' sound.
3. Set your desired personal combination by turning the dials (2), for
example, 8-8-8.
4. Push the button (3) end to arrow indication until you hear "click" again,
then the reset button (1) will pop-up, the lock is now in open mode and
reset process is completed.
Please write down your combination and put it in a safe place. To reset your
lock, please set it to its current combination and then repeat the steps above.
WARNING: If the cylinder is opened, please pay attention
to lock it again by turning it to the red dot position by the
direction of the arrow (Any tool which can be inserted in the
cylinder is OK)
How to charge your devices from the backpack:
The backpack does not come with a power bank. Please connect your own
power bank to the USB cable inside the backpack to be able to charge your
devices through the USB port on the lock.
1. Open the dust cover on the lock to access the USB port.
2. Plug the USB cable with your device to the USB port on the lock. Your
device will start charging.
dust cover
3
Publicidad
