ReliOn Premier Classic Manual Del Usuario página 23

Step 2
While the symbol blinks, press and hold the
<
button for 3 seconds until 'ctl' appears on
the display.
Step 3
Shake the ReliOn™ Premier Control
Solution bottle well before each
test. Remove the cap and squeeze
the bottle to discard the first 1 or
2 drops.
Then, wipe the tip with a clean
tissue or cloth. While the
blinks, apply the control solution to the narrow edge of the test
strip until the meter beeps. Make sure the confirmation window
of test strip fills completely.
NOTE
• The meter may switch off if the control solution is not applied
within 2 minutes of the
the screen.
• If the meter turns off, remove the test strip, reinsert and start
from step 2.
symbol
symbol appearing on
23