Matco Tools MHLMA Guia De Inicio Rapido

60702-SLIM PROFILE COB LED HEADLAMP-ENGLISH
Study, understand and follow all
instructions provided with this product.
Read these instructions carefully before
installing, operating, servicing, or
repairing this tool. Keep these instructions
in a safe, accessible place.
Caution: To help prevent personal injury
• Do not dispose of in fire.
• Do not disassemble.
• Charge only with specified charger.
NOTE: CHARGE HEADLAMP FOR 8
HOURS BEFORE INITIAL USE.
CHARGING INSTRUCTIONS:
1. Remove the rubber cover from battery
2. Plug the regular USB end into the wall
3. LED indicator will turn GREEN when
OPERATION:
1. Depress and release power switch to
2. Depress and hold power switch to
WARNING
WARNING
box and fully insert micro USB plug
into micro USB jack.
adapter then into the 110-120VAC outlet
The LED will illuminate RED.
fully charged.
turn headlamp on. Pressing again
within 5 seconds will toggle through
each mode. If the headlamp remains in
any mode for longer than 5 seconds,
the next press of the power button will
turn the headlamp off. There are 2 fixed
light levels: High and Medium. The
dimming feature can be used to get to
the lowest light setting for the longest
run time.
engage dimming mode. The light will
cycle through highest and lowest
settings with double flashes as
indicator of the highest and lowest
SLIM PROFILE COB
LED HEADLAMP
settings. Release switch at desired
light output.
3. In any mode, quickly depress and
release power switch twice to engage
the motion sensing power switch.
4. When the motion sensing power switch
is active, the power switch will be
illuminated and the headlamp can be
switched off and on by waving your
hand in front of the motion sensor. The
motion sensor is located directly below
the power switch.
5. To turn off the motion sensing power
switch, depress and release the power
switch once.
6. To activate the RED Safety LED, depress
the white button on the battery
housing. Press once for solid RED LED,
press again for blinking RED LED. Press
a third time to turn off.
ONE YEAR LIMITED WARRANTY
This product is backed by a One Year Limited
Warranty. This warranty covers
manufacturer defects and workmanship. The
warranty excludes misuse or abuse and
normal wear and tear.
WARNING:
Cancer and Reproductive Harm.
www.P65Warnings.ca.gov
DO NOT DISCARD - GIVE TO USER
Page 1
MHLMA
Made in China
to Matco Specifications
PATENT PENDING
1905137-08