3.
Correctly place the product foot stool of the product required to be fixed
onto the horizontal floor, then place for more than 10min and turn on the
power after the oil flow is balanced.
4.
This machine has a natural vaporization and humidification function. After
the heater is horizontally placed, add an appropriate amount of water into the
humidification case and install in place (when water level is lower than water
level line, immediately add water).
Startup
Before use, determine that power sockets are of the 250V 50HZ and
1.
withstand current is ≥15A.
Plug the power supply. At this time, the electric heater is in the standby
2.
status.
Functional Adjustment
1.
After the knob for temperature control is turned to its maximum position, turn
the power switch knob, the electric heater starts to work, the work indicator is
synchronously illuminated, the knob indication corresponds to Level 1 whi-
ch is the heating at low level, Level 2 which is the medium level heating and
Level 3 which is the high level heating.
Increase or decrease room temperature and you can adjust the degree of
2.
temperature controller knob to realize the appropriate temperature that you
need. When the room temperature reaches the temperature needed by you
and is maintained at such point, the adjustment temperature controller is
automatically switched off and the heater automatically stops heating. When
the temperature around the temperature controller is decreased, the tempe-
rature controller is automatically restored and the heater continues to heat.
Power-off
Turn the switch knob to the corresponding O position. At this time, the opera-
ting indicator goes off, the heater stops heating and then turn the temperature
control knob indication to the minimum position. At this time, the sound of tem-
perature control disengagement can be heard. At this time, the heater is in the
power-off status. If you do not use it, please unplug the power socket.
All manuals and user guides at all-guides.com
4