laxihub J1 Manual Del Usuario página 5

Chime Pairing
Step 1：Short-Press the"RESET" button of the Chime. When successfully enter
the configuration mode, the LED status indicator will flash blue.
Step 2：Access to "Settings" of your App, press "Basic Function".
Step 3：Select "Wireless Chime", and then press "Chime Pairing", confirm the
blue light of chime blinks.
Step 4：Press "Pair" and your Chime will automatically pair your doorbell.
Step 5：After pairing successfully, the Chime status light will be in solid on
blue.
Note:
If the configuration fails, please press the "RESET" button for 5 seconds
to reset your Chime and then short-press the "RESET" button to add it
again.
3
EN