Display Modes; Brightness / Contrast - Rehan i-See Manual De Intrucciones

Push button
Press the button
to cycle through
different dis-
play modes.
Keep the button pressed for
3 seconds to switch between
the photograph or reading
mode you used last.
You can find a detailed over-
view of the available display
modes in the technical spec-
ifications section of this
manual.
Push button
Push the but-
ton to adjust
the brightness
of the image on
your screen.
You can change the contrast
of the image on the screen by
keeping the button pressed
and using the zoom buttons.
In high contrast modes you can change the contrast of the image on
the screen only when the autofocus is blocked.
User Manual V1.50
All manuals and user guides at all-guides.com

Display modes

Brightness / Contrast

Turning knob
Push the knob to
switch between
photograph
modes or read-
ing modes. The last used
mode will automatically be
selected. Turn the knob to se-
lect different display modes.
You can find a detailed over-
view of the available display
modes in the technical spec-
ifications section of this
manual.
Turning knob
Turn the knob to
the left or right
to decrease or
increase the
brightness of the image on
your screen.
Keep the knob pressed and
turn the knob to the left or
right to decrease or increase
the contrast of the image on
your screen.
EN
19