ACM TX PLUS 12D Manual De Instrucciones página 18

4. Select the day on which you want to set up the event by using
the UP / DOWN keys and press MENU to confirm.
The display will show event number 1
5. Select the event (1 to 5) using the UP / DOWN keys and press
the MENU key to confirm. The hour digits blink:
6. Set the time using the UP and DOWN keys and press the
MENU key to confirm. The minute digits blink:
7. Set the minutes using the UP and DOWN keys and press the
MENU key to confirm.
The icon of Channel 1 blinks showing its state ON (active) or
OFF (inactive)
8. Set the channels which must transmit for this event:
using the UP and DOWN keys, select the ON (active) or OFF
(off) state of the channel, press MENU to confirm and proceed
to set the next channel.
9. Repeat this procedure for all 12 channels.
NOTE: This step allows you to associate multiple channels
to the same event by creating groups of channels that will
be activated simultaneously. When channels are activated
they stay on.
10. After setting channel 12, press MENU to confirm.
The opening event icon blinks:
NOTE: If you accidentally have not activated any
channel, programming restarts from step 8
11. Select the desired event using the UP and DOWN keys and
press MENU to confirm and proceed.
Available Events:
Opening event
Intermediate position event
Closing event
ON
SUN ON event
SUN OFF event
OFF
12. The icon
blinks for 2 seconds to confirm that the operation
was successful, then stays on for 10 seconds.
NOTE: If during the 10 seconds of waiting you press any
key, programming returns to step 4.
13. Programming automatically returns to step 4.
14. Repeat the procedure to schedule all the events of the week.
NOTE: If an event must be repeated over several days,
use the COPY menu to speed up the procedure (see
"Copying schedules events")
15. Once the programming of all events is over, wait for 30
seconds without pressing any keys.
TX PLUS 12D automatically quits programming and the display
returns to normal view.
NOTE: If you have scheduled events for the current day,
the icon stays on
- 18 -