Setting Up, Changing And Cleaning The Filter; Important - Samba PURITY EC060 Manual De Instrucciones

After use
• Press the on/off switch to stop the vacuum cleaner.
• Unplug the cord.
• Empty the dust reservoir.
SETTING UP, CHANGING, AND CLEANING THE FILTER

IMPORTANT

WARNING: Allows unplug the device before opening the collection
container.
NOTE: Always use the vacuum cleaner with the filter in place.
PRECAUTION: The suction aperture should be open, and free of
obstructions at all times. If not, the motor will overheat, possibly resulting
in damage to the device.
1. To open the dust reservoir, press the button and remove the dirt-collection
container.
Press the release
button of dust
tank
2. Remove the filter and clean it. To do so, rinse the filter in cold water and wait
until it has completely dried before putting it back in place.
Take off the
dust tank
17