Philips SWS2100W/27 Manual Del Usuario página 5

6 Operation
Turn on the TV and set it to either Channel 3 or 4, whichever of the
1
two is not used for regular broadcasts in your area.
Set the RF Modulator's CHANNEL 3 or 4 switch to the same
2
channel you set on the TV (3 or 4) 6
Turn on the connected video source, the modulator will deliver the
3
video/audio signal to the TV set and the red light of MOD. ON will
be ON.
Turn off the connected video source, the modulator will be switched
4
automatically to deliver the ANT/Cable signal to the TV set and the
red led of MOD. ON will be off.
6 Specifications
Video Carrier Output Level
RF Output Channels
RF Output Impedance
Video Input Impedance
Audio Input Impedance
D Note
Specifications are typical, individual units might vary.
Specifications are subject to change and improvement
without notice.
7 Warranty
Limited One-Year Warranty - Philips warrants that this product shall be free
from defects in material, workmanship and assembly, under normal use, in
accordance with the specifications and warnings, for one year from the date
of your purchase of this product. This warranty extends only to the original
purchaser of the product, and is not transferable. To exercise your rights
under this warranty, you must provide proof of purchase in the form of an
original sales receipt that shows the product name and the date of purchase.
For customer support or to obtain warranty service, please call 919-573-
7854. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES.
Philips' liability is limited to repair or, at its sole option, replacement of the
product. Incidental, special and consequential damages are disclaimed where
permitted by law. This warranty gives you specific legal rights. You may also
have other rights that vary from state to state.
63 dB uV
3 or 4
75 ohms
75 ohms/1 k ohms
13 ± 3 k ohms