KODA LM57483 Instrucciones De Cuidado Y Uso página 6

Hanging on the wall:
You can use the work light by hanging on the wall. Expand the work light by
rotating the base 180⁰ (like below) and hang on the screw with the base.
NOTE: Please find an appropriate mounting surface and mounting means (not
included), which is suitable for the weight of the work light.
MAINTENANCE:
Cleaning instructions: When cleaning, make sure you have unplugged the work
light and allow it to cool to room temperature. Do not open the power socket
covers when cleaning. The work light can be cleaned with a feather duster or a
soft damp cloth. You should plug in the work light only after it has completely dried.
Do not use solvents or harsh chemicals for cleaning.
TROUBLESHOOTING:
1. The LED light cannot illuminate.
Solution: Make sure the power cord is securely connected to a wall outlet with AC
power running to it. The master switch must be in the ON position and the light
switch either in High or Low position.
2. No power running to outlets or USB ports.
Solution: Make sure the power cord is securely connected to a wall outlet with AC
power running and work light master switch is ON.
3. The work light turns off automatically.
Solution: The sockets may be overloaded. Unplug work light from wall outlet.
Unplug all products connected to the work light. Wait 10 minutes before plugging
the work light back into an outlet.
6