Method Of Use - Orbegozo PL 1160 Manual De Instrucciones

PL 1162
Specifications
Voltage: 110-240V ~ 50 / 60Hz
Power: 40W
Maximum temperature: 190 ºC
Reaches operating temperature within 2 minutes.
Diameter: 19mm - 32mm

Method of use

1. Fully unwind the power cord.
2. Plug the cord into a suitable power source and press the on / off switch
light will turn on.
3. Wait 2 minutes for it to reach operating temperature.
4. Take a section of dry hair, place it in the area of the heating element and quickly roll the
section around the surface.
5. Wait 8-10 seconds and then release the hair.
6. After use, press the on / off switch. The light will turn off.
7. Unplug the appliance.
8. Wait for it to cool down before putting it away.
Advice
 Different types of hair require different intensity when curling them.
 If your hair is fine or weak, you should set a strand of hair for a short period of time.
 If your hair is coarse and loose, the curling time should be increased.
 Choose the best time suitable for your hair type, start with a few seconds, gradually
increasing the time until the desired effect is obtained.
. The indicator
10