JUMP STARTING CONT.:
Polarity Protection Circuit Status
Status (Light & Sound Indicator)
Red Light
Green Light
Solid LED On
Message on LCD Screen
Low Power, charge at least 50%
Battery Protected, Unplug, Start over
Device is too hot, Cool before use
Sound
None
The car battery is ready for jump start.
None
The Jump Starter needs to be charged.
None
The car battery is ready for jump start. If
the indicator doesn't turn solid Green, the
car battery voltage is higher than the jump
starter. You can still jump start your battery,
but may need to charge your jump starter.
Beeping
Disconnect the jumper cables from the car
battery and jump starter. Either the car jump
start is complete or there is a connection
problem.
None
This status shows after 90 seconds time out.
Disconnect the jumper cables from the car
battery and jump starter to reset. Reconnect
the jumper cables to jump start the vehicle.
None
Please contact TYPE S for troubleshooting.
Flashing LED
Message Meaning
Jump Starter battery below 50%
Wrong connection
Temperature of jump starter is above 55°C
12
Status Meaning:
LED Off