Pyle 2R Serie Manual De Instrucciones

2R / 4-BUTTON SERIES
VEHICLE SECURITY SYSTEM
Button
1
Button
3
Standard Features:
Two 4- Button Remote Transmitters
Status indicator (LED)
Valet / override switch
Multi-tone siren (120dB)
Dual stage impact detector
Remote panic
Remote chirp mute
Remote sensor bypass
Passive or active arming
Optional Features:
Starter disable
Flashing parking lights
Keyless entry
Remote trunk or hatch release
Illuminated entry
Hood and trunk protection
Remote auto start
Power window roll up
Back-up battery w/charging circuit
Glass Sensor
Microwave sensor
Note: Some features may require additional parts
and labor, and may not be appropriate for certain
vehicles. Consult your authorized dealer.
All manuals and user guides at all-guides.com
Button
2
Button
4
1
System Operation
ARMING OPERATION
To arm the system press transmitter button 1:
• The siren will chirp once.
• The parking lights will flash once.*
• The doors will lock.*
• The LED will turn solid for 10 seconds
then start flashing slowly.
seconds the system is armed.
After Arming, if the system detects a bad sensor
or an open zone, the siren will chirp and the
parking lights will flash 4 times to indicate a
zone is open. The system will ignore that input,
but keep all other areas protected.
While Armed, the system will trigger if:
• The doors are opened.
• The shock sensor detects an impact to
the vehicle.
• The hood or trunk is opened.
When triggered, the siren will sound, the horn
will honk*, and the parking lights will flash* for
30 seconds.
If the same input triggers the system 3 times
during a single arming cycle,the system will bypass
that input, keeping the other zones protected,
until the next time the system is armed.
If the shock sensor detects a light impact to the
vehicle, the siren will chirp and the parking
lights will flash 5 times to warn away the
potential intruder.
*
Optional Feature
After 10