Model Number:20444-000
TABLE LAMP
IMPORTANT SAFETY INSTRUCTIONS
Read and Save:
1. To reduce the risk of electric shock, this lamp has a
polarized plug (one blade is wider than the other ).
The plug will fit in a polarized outlet only one way.
If the plug does not fit fully into the outlet reverse
the plug. If plug still does not fit, contact a qualified
electrician. Never use an extension cord unless the
plug can be fullyinserted. Do not alter the plug.
Do not install non-factory wiring or any other
2.
electrical components. Altering or modifying
the lamp in any way will render the product
unsafe.
3.
Avoid laying objects directly over the power supply
cord to avoid cutting or damaging the wire.
4.
Keep curtains, shades, wall hangings and all
other fabrics and objects away from the lamp,
lamp switch and light bulb. Lamps are not
designed to support additional weight.
5.
Place the lamp on a stable, level surface in an
areawhere the lamp will not be tipped over or
bumped.
6.
This lamp is approved for indoor use only.
BULB REPLACEMENT
Use one 100 Watt, Type A bulb or CFL or LED
equivalent.
DO NOT EXCEED MAXIMUM BULB WATTAGE.
1. Turn off and unplug lamp and allow the bulb to
cool before replacing bulb.
2. Light bulb should never touch the shade.
CLEANING AND MAINTENANCE
1. To clean : use a soft, dry cloth only.
2. Do not use chemica l or abras ive cleaners.
(not included).
Printed in China
ASSEMBLY INSTRUCTIONS
1. Place the base (A) on a flat surface.
2. Install light bulb into socket assembly (B).
3. Pinch and insert harp (C) into the harp fittings on
socket assembly (B). Slide the caps on harp (C) over
the fittings on socket assembly (B) to secure.
4. Remove the finial (E) from the harp (C), place the
shade (D) on the harp (C) and secure with finial (E).
5. Insert plug into an electrical outlet.
6. Use the rotary switch on socket assembly (B) to
turn lamp ON and OFF.