Alarm
The Snapfōn® ezTWO includes an alarm which will allow you to
set up to 4 different alarm times with their own individual
characteristic tones.
To set an alarm, go to the Alarm menu, highlight any of the 4
alarm positions, and press the left option button to Edit.
Use the +/- button to turn the alarm from off to on.
Press the down arrow on the navigation button and set the time
using the numeric keypad (use hh:mm format).
Press the down arrow again to move to the AM/PM field and use
the +/- button to select either AM or PM.
Press the down arrow again to move to the Repeat selection.
This allows you to select (using the +/- button) whether the alarm
will go off one time (Once), or if you would like it to go off at the
same time every day (Everyday), or if you would like it to go off on
only certain days (Custom).
If you selected Custom, pressing the down arrow again will take
you to the day selector where you can program what days the
alarm should go off. Use the +/- button to progress through the
days and the Left Option button to turn the day On or Off.
Press the down arrow button 2 times and then press the Left
Option button to select the alarm tone you would like to use.
30