Descargar Imprimir esta página

nomon Mixta Trio Instrucciones De Montaje

Publicidad

Enlaces rápidos

1
Colocar en una super cie boca abajo los sobres
de nogal de los extremos de la mesa.
Place the walnut tops from the sides of the table
face-down on a surface.
Utilizar para los extremos de la mesa.
Use these holes for the sides of the table.
2
Fijamos las patas con los sobres mediante los tornillos M6.
No apretar completamente los tornillos para poder ajustar
la posición de los sobres en el punto 4.
Fix the legs to the tops using the M6 screws. Do not fully
tighten the screws to be able to adjust the position of the tops
later in point 4.
3
Damos la vuelta a la mesa, apoyandola sobre sus patas.
Turn the table over and let it rest on its legs.
4
Por último colocamos el sobre de mármol en el hueco restante
y lo jamos con los "tornillos para mármol" . Una vez los tres sobres
estén en la posición correcta, terminamos de apretar los tornillos.
Finally, place the marble top in the remaining space and x it with
the "marble screws". Once the three tops are in the correct position,
we nish tightening the screws.
¡ATENCIÓN!
Aconsejamos dejar para el nal el sobre de mármol.
ATTENTION!
We advise leaving the marble top for the end.
"tornillos para mármol"
"marble screws"

Publicidad

loading

Resumen de contenidos para nomon Mixta Trio

  • Página 1 Colocar en una super cie boca abajo los sobres Por último colocamos el sobre de mármol en el hueco restante de nogal de los extremos de la mesa. y lo jamos con los “tornillos para mármol” . Una vez los tres sobres Place the walnut tops from the sides of the table estén en la posición correcta, terminamos de apretar los tornillos.
  • Página 2 Instrucciones de montaje Assembly instructions Mesa Mixta Trio Mixta trio coffee table...