Klarstein 10004396 Manual De Instrucciones página 5

A. Switch and plug diagram behind your watch winder.
1) Feature: The battery used is rechargeable automatically when it has electrical source, the fi rst time
it need to be recharged at least 15 hours and it can keep to work at running 5min and stop 15 min
program about 50 hours.
2) Change of battery: Open four screw on the bottom of watch winder, then loose four clip on the 2) Change of battery: Open four screw on the bottom of watch winder, then loose four clip on the
backboard of batteries packet, take out old & change new battery. backboard of batteries packet, take out old & change new battery.
Setting Program Information
STOP
PROGRAM 1
20 minutes, then repeating cycle.
PROGRAM 2
resting for 50 minutes, then repeating cycle.
PROGRAM 3
minutes then will turn clockwise for 2 minutes and rest for 28 minutes, then
repeats complete cycle.
PROGRAM 4
clockwise for 10 minutes. This cycle will repeat for 1 hour then will rest for 7 hours.
The cycle will restart from the beginning after every cycle
5
All manuals and user guides at all-guides.com
Operation
Batteries
Knob Switch Setting
Knob Switch Setting Knob Switch Setting
The unit is off .
On this setting, the winder will turn clockwise only, turning 1 minute and resting for
On this setting, the winder will turn counter-clockwise only, turning 3 minutes and
On this setting, the winder will turn counter-clockwise for 2 minutes and rest for 28
On this setting, the winder will turn clockwise for 10 minutes then turn counter-