Before You Begin; Other Documentation And Media You May Need - Dell PowerVault MD3200 Manual De Instrucciones

Ocultar thumbs Ver también para PowerVault MD3200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com

Before You Begin

Before setting up your Dell™ PowerVault™ MD32xx RAID enclosure,
you must consider certain best practices to ensure that your RAID enclosure
operates at maximum efficiency and offers full redundancy (if required).
Throughout the network, always use a Category 5e (or higher)
Ethernet cable.
Before connecting any cables between the host server and storage array,
physically label each port and connector.
Always follow proper power-up and power-down procedures when cycling
power across the network. You must also ensure that critical network
components are on separate power circuits.

Other Documentation and Media You May Need

WARNING:
See the safety and regulatory information that shipped with
your system. Warranty information may be included within this document or
as a separate document.
NOTE:
All PowerVault MD32xx documents are available at
support.dell.com/manuals.
The rack documentation included with your rack solution describes how to
install your system into a rack.
The Owner's Manual provides information about system features and
describes how to troubleshoot the system and install or replace system
components.
The Deployment Guide provides information about installing and
configuring the software and hardware.
The CLI Guide provides information about using the command line
interface (CLI) to configure and manage your storage array.
Getting Started With Your System
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Powervault md3220

Tabla de contenido