Hellberg Local 465 Instrucciones De Uso página 9

Accessories and spare parts (pic. B)
B:1. Hygiene kit: 99403-001
B:2. Sweat absorbers: 99900-001
B:3. Windshield boom microphone: 16999-001
B:4. USB charging cable Local: 39927-001
B:5. Boom microphone: 16982-001
B:6. Windshield level dependent microphones: 1059-001
B:7. Spare headband electronic: 26046-915
B:8. Spare helmet arm (pair): 26108-910
B:9. Battery pack AA: 17004-001
B:10. Battery pack gasket: 17112-001
B:11. Charger US: 17193-002
Change the hygiene kit (pic. D)
•Remove the old foam liner (A3) and insert the new
•Pull off the old ear cushion (A4)
•Centre the new ear cushion over the hole
•Press with a finger along the outside of the ear cushion until it attaches all around the edges
•Pull off the old head cushion (A5) and insert the new
Approval and technical data (E)
E:1) Headband
E:2) Helmet mounted
E:3) Tested and certified to (standards)
E:4) Weight
E:5) Mean attenuation
E:6) Standard deviation
E:7) Assumed Protection Value
E:8) Tested by (notified body)
E:9) Headband force
E:11) Additional technical data
E:12) Radio channel frequencies
E:13) Sub tone channel frequencies
9