Technical Specifications - Extol Industrial 8794550 Traducción Del Manual De Uso Original

II. Technical specifications
Model/order number
Power input
Input voltage/frequency
Rivet body diameter 1)
Rivet body material
Pulling force
Overall lift height
Length of the power cord
Sound pressure level LpA
Sound power level LwA
Max. vibration on the handle (sum of three axes)
Weight without the power cord
Protection
Protection class
1) This is not a rivet mandrel that is torn off after being pulled. The diameter of the rivet body corresponds to the dia-
meter of the rivet mandrel for which the rivet bolt with the specified diameter of the rivet body on the head of the
rivet bolt is intended, which is screwed into the barrel of the rivet gun.
y The declared aggregate vibration value and the declared noise emission level were measured in accordance with
standard testing methodology and may be used for the comparison of one tool with another. The declared aggregate
vibration value and the declared noise emission level may also be used for determining preliminary exposure.
•
WARNING
y Vibration and noise emissions during actual use of the tool may differ from the declared values depending on the
method in which the tool is used, particularly the type of work piece that is being worked on.
y It is necessary to determine the safety measurement for the protection of the operator, which is based on the assess-
ment of exposure under real operating conditions (to include all the parts of the work cycle such as time for which the
tool is turned off and when running idle outside the time that it is in operation).
EN
8794550
400 W
220-240 V ~50 Hz
3.2 – 4.0 – 4.8 mm
All metals
≤ 8000 N
22 mm
2.5 m
78.1 dB(A) ; uncertainty K=±4 dB(A)
88.2 dB(A) ; uncertainty K=±4 dB(A)
˂2.0 m/s
2 ; uncertainty K=±1.5 m/s 2
2.3 kg
IP2X
II (double insulation)
Table 1
74
III. Parts and control elements
1 2
Fig. 1, position-description
1) Rivet bolt
2) Rivet gun barrel
3) Rivet bolts for various rivet body diameters (the rivet
body diameter is marked on the head of the bolt)
4) Motor ventilation openings
75
3
10 9 8 7 6
5) Carbon brush housing cover
6) Belt hook
7) Handle
8) Power cord
9) Power switch
10) Trigger
EN
4
5
Fig. 1