Symbols And Signs - Tinkerbots TB1701 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
running in the appropriate direction, etc.) and avoid it in future. in
the case of repeated overload switch-off, the relevant modules will
cease to perform their motion fully; switch off for 10 to 15 minutes
and allow to cool.
7) removing from operation; disposal
nOtice
to maximise the prevention of negative effects to health
and the environment, this product must be disposed of in a manner
compliant with the eu Directive on Waste from electrical and
electronic equipment (Weee).
This product has been designated as compliant with EU Directive
2012/19/EG on Waste from Electrical and Electronic Equipment
(WEEE). Ensure that the device is disposed of properly. The WEEE
symbol on the packaging indicates that this product may not be
disposed of together with normal household waste, but rather, must
be brought to the nearest disposal location for disused electrical
and electronic equipment. Disposal must be compliant with the
environmental guidelines in force for waste disposal. For further
information on disposal, re-use and recycling of this product, please
consult relevant local bodies (Environmental Protection Department)
or the private waste management organisation in your town or city.

8) symbols and signs

= DC polarity of barrel jack connector on switching
power unit
(inside positive/outside negative)
= Direct voltage switching power unit with 9.0V
output voltage
and a maximum output current of 840mA
= Switching power unit with IP40 protection class
(protected against 1mm and larger solid foreign
bodies)
14
All manuals and user guides at all-guides.com
All Tinkerbots products are developed and produced in compliance
with the regulations of Toy-Safety Directive 2009/48/EG. The full
compliance statement is available from the manufacturer on request.
illus. 1
illus. 3
illus. 5
= Switching power unit tested in accordance with
EN 61558-2-7 and EN 61558-2-16 safety of
transformers
= Switching power unit complies with device
protection class II
2
3
4
5
1
6
1
2
Class 1 LED
Class 1M LED
Product
Product
1
1
1
illus. 2
illus. 4
1
1
1
2

Publicidad

Tabla de contenido
loading

Tabla de contenido