Before Initial Use - auna multimedia TC-386WE Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
Unpack all parts and remove all protective material.
Connect the unit to any household mains socket after checking the mains voltage and after all other
connections have been made.
Do not cover any vents and make sure that there is a space of several centimeters around the unit for
ventilation.
Top cover assembly
Push the metal bracket to the rear.
Connect the metal bracket to the top cover
Connect the hinge of the top cover to the main unit
Connection
Connect the power cord o AC outlet and connect the speaker jack to the speaker terminal located on
the rear side of unit.
Turn the POWER ON/OFF button (19) clockwise until it clicks dinstinctly.
Switch the function selector (6) to TUNER. If the LCD display (2) lights up with blue backlight, the power
supply is normal and your system is ready.
Manual tuning
Turn the function selector (6) to TUNER and then select desire band (AM, FM or FM-stereo) with the-
BAND/FM-ST selector (10).
Tune to the desired station by turning the tuning knob (18).
Use the volume knob (19) to adjust the volume level.
FM & FM-stereo reception
Set the BAND/FM-ST selector (10) to FM. Programs are received in mono mode. In particular when
stereo signals are weak, it might be preferable to receive the program in mono.
Set the BAND/FM-ST selector (10) to FM-ST to receive stereo programs. The BAND/FM-ST LED will
light up to indicate FM stereo program is received.
Hints for best reception
AM : The receiver has a built-in AM bar antenna. If AM reception is weak, slight rotation or re-positioning of
the unit will usually improve the reception.
FM : The receiver has a build-in FM wire antenna hanging from the rear cabinet. This wire should be un-
raveled and extended completely for best reception.
All manuals and user guides at all-guides.com

Before Initial Use

Operation
FM Radio
19

Publicidad

Tabla de contenido
loading

Tabla de contenido