Charging Mobile Devices - MAGINON MPP 5200-LI Manual Del Usuario

Start

Charging mobile devices

The Power Bank can be used to charge up to three devices
simultaneously. When using all outputs simultaneously the
total output voltage must not exceed 2.1A.
1. Connect a USB charging lead suitable for the device to be
charged to the respective USB connection
the Micro USB plug
2. Next, connect the USB charging lead to the device to be
charged. The charging process starts automatically.
3. If the charging process does not start automatically,
briefly depress the On/Off button
operation.
• If the device to be charged contains a Micro USB
charging lead, you can also use the Micro USB charging
2
lead
• During charging, the current charging status is shown
by the charging LEDs
4. To stop charging, disconnect charging lead from mobile
device. The charging indication LEDs then extinguish after
approx. 20 seconds.
18
All manuals and user guides at all-guides.com
3 of the Power Bank.
of the Power Bank.
8
7
5 to start the charging
.
/ 9 or use