Manuales relacionados para Techni Mobili RTA-2706A
Resumen de contenidos para Techni Mobili RTA-2706A
- Página 1 MODEL RTA - 2706A Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference. MODEL RTA-2706A...
- Página 2 MODELO RTA - 2706A Gracias por comprar uno de nuestros productos. Por favor lea cuidadosamente las instrucciones de ensamblaje antes de instalar la unidad. Por favor guarde este manual para referencias futuras. MODELO RTA-2706A...
- Página 3 RTA-2706A DIMENSIONS Product Size: 37.8"W x 22"D x 34.8"H MAXIMUM WEIGHT CAPACITIES DO NOT exceed this limit Please use care and good judgement when placing objects on wood surface...
- Página 4 RTA-2706A Left Structure Central Structure Right Structure Estructura Izquierda Estructura Central Estructura Derecha Studs Back Panel Monitor Panel CPU Panel Topes Panel Posterior Panel de Monitor Panel Para Cpu Hooks Bases Main Panel Keyboard Panel Panel Principal Panel para Teclado...
- Página 5 RTA-2706A PART QTY. ITEM PART QTY. ITEM 6X35 MM 3X15 MM 6X50 MM 6X12 MM 4X14 MM 4X4 MM 4X28 MM...
- Página 6 RTA-2706A...
- Página 7 RTA-2706A...
- Página 8 RTA-2706A Insert the Studs (4) at the bottom of the Left, Central & Right Structures (1,2&3). Inserte los topes (4) en las patas de las estructuras izquierda, derecha y central (1,2,3). Before doing this step, make sure that all the nuts in the panel are properly aligned to receive the screws! Antes de hacer este paso, asegúrese que las tuercas...
- Página 9 RTA-2706A Before doing this step, make sure that all the nuts in the panel are properly aligned to receive the screws! Antes de hacer este paso, asegúrese que las tuercas en el panel estén alineadas para recivir los tornillos! SCREWS...
- Página 10 RTA-2706A P.10 Top hole Tabs Right Left Derecho Izquierdo SCREWS TORNILLOS 4X28 MM 4PCS Use screws E to assemble one pair of Sliders (14) to the Central & Right Structures (2&3) noting that the they must slide-out to the front of the desk. You will find four holes in the metal structures, use the top two.
- Página 11 RTA-2706A P.11 SCREWS TORNILLOS 3X15 MM 4PCS Use screws F to assemble the thiner part of the Sliders (12) to the Drawer (13). Use tornillos F para fijar los deslizadores de gaveta (12) a la Gaveta (13), note que debe fijar la parte delgada del deslizador.
- Página 12 RTA-2706A P.12 SCREWS TORNILLOS 6X50 MM 6PCS Use screws B to assemble the back face of the Main Panel (8) to the Main Structures (1,2&3). Use tornillos B para fijar el Panel Principal (8) a las estructuras derecha, izquierda y central (1,2,3).
- Página 13 RTA-2706A P.13 Use screws G to fix the Hooks (9) to the underside of the Main Panel. Use tornillos G para fijar las bases (9) a la parte inferior del Panel Principal (8). Right Derecho SCREWS TORNILLOS Left 6X12 MM...
-
Página 14: Care And Maintenance
CARE AND MAINTENANCE English - DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT, OR EXTREME ENVIRONMENTAL CONDITIONS. EXPOSURE WILL DAMAGE THE PRODUCT, WHICH IS NOT COVERED BY THE WARRANTY. - DO NOT USE SOLVENTS OVER SURFACES OR STRUCTURAL TUBES. SURFACES MUST BE CLEANED WITH A SOLUTION OF A SMOOTH SOAP AND WATER, THEN CLEARED WITH A DRY TOWEL.