AirLive Security Gateway Serie Guia De Inicio Rapido página 17

STEP 5:
When the New Entry option appears, enter the
following configuration:
Source Address
Destination Address
Service
Action
Click on OK to apply the changes.
STEP 6:
The configuration is successful when the screen
below is displayed. Make sure that all the
computers that are connected to the LAN port have
their Default Gateway IP Address set to the Security
Gateway's LAN IP Address (i.e. 192.168.1.1). At
this point, all the computers on the LAN network
should gain access to the Internet immediately. If a
Security Gateway filter function is required, please
refer to the Policy section in the user manual.
English
12
All manuals and user guides at all-guides.com
-Inside_Any
-Outside_Any
-ANY
-Permit ALL
Security Gateway Series