Publicidad
Enlaces rápidos
Publicidad
Resumen de contenidos para Weathermatic Turbo 3
- Página 2 SPRINKLER HEAD SETUP BEFORE INSTALLATION IN GROUND • Set sprinkler no lower than flush to grade • Place inner assembly on flat surface Nozzle Installation • With one hand push down cover • Unscrew top from tube • With other hand insert nozzle with ears up into nozzle opening •...
- Página 3 ARC ADJUSTMENT • With one hand hold ribbed section • Pierce membrane with nozzle tool • With other hand rotate turret to adjust arrow to arc angle • Arrow located opposite to nozzle • Rotate nozzle retaining screw in the clockwise direction in order to •...
- Página 4 NOZZLE INSERTION AFTER INSTALLATION ARC LOCATION ADJUSTMENT AFTER INSTALLATION • With one hand hold flow tube below ribbed section • With the other hand rotate turret to relocate arc stop • To adjust arc size, see • To enlarge the arc turn the turret in the direction of the + arrow.