ASSEMBLE GUIDELINES
Assemble the food bucket, lid and food tray as shown in below pictures:
A
A: Insert the food bucket into the slot and rotate clockwise until tight
B: Rotate clockwise to assemble the lid
C: Insert the food tray upwards into the bottom
Dual power supply. Connect the feeder with USB cable and power adapter as below picture; or be
powered by 3 "D" size batteries (recommend to use alkaline batteries). You are recommended to
install 3 "D" size batteries in case of sudden power breakout or power adapter failure.
Make sure battery polarities are correct.
Open the lid as shown in the picture below and lock it well when it has food:
Rotating counterclockwise
to open the lid
B
C
Rotating clockwise to lock the lid
3