Festool PHC 18 Manual De Instrucciones página 24

English
Make minimal alterations to
the position of the smartphone
until the charging process
starts.
Charging with USB cable*
Metallic foreign objects (e.g.
coins or keys) affect the charg­
ing process and must not be on
the inductive charging sur­
face [1-5].
► Connect USB cable* with USB-A
port [1-3] or with port compatible
[1-1].
with USB‑C TM
► Connect USB cable* with end device.
► Check state of charge of the end de­
vice.
24
LED indicator [1-4] lights up green:
Charging process begins automatically
or charging process is completed.
* Not included in the scope of delivery.
7.3 Troubleshooting
LED indicator [1-4] flashes red: Charg­
ing process faulty.
Charging process of the used port or
the inductive charging surface is abor­
ted.
► Switch off (see section 7.1).
► Remove the battery pack (see sec­
tion 6).
► Check Phone charger for defects or
foreign objects.
► Check USB cable*.
► Reinsert the battery pack (see sec­
tion 6).